Rigol DSA1000A Series, Programming Manual

Page: 125 / 174

Chapter 2 Command Systems
RIGOL
Programming Guide for DSA1000A series 2-111
23.
:SYSTem:PRESet:TYPE
Syntax :SYSTem:PRESet:TYPE FACTory|USER
:SYSTem:PRESet:TYPE?
Function Specifies the system preset type.
The query returns “FACT” or “USER”.
Default Factory
Front Panel System, Reset, Preset Type, Factory/User
24.
:SYSTem:PRESet[:USER]:SAVE
Syntax :SYSTem:PRESet[:USER]:SAVE
Function Saves the user settings.
Front Panel System, Reset, Preset Type, User, Save Preset
25. :SYSTem:PROBe[:STATe]
Syntax :SYSTem:PROBe[:STATe] OFF|ON|0|1
:SYSTem:PROBe[:STATe]?
Function Sets the probe status.
The query returns “0” or “1”.
Default OFF|0
26.
:SYSTem:SPEaker[:STATe]
Syntax :SYSTem:SPEaker[:STATe] OFF|ON|0|1
:SYSTem:SPEaker[:STATe]?
Function Turns on or off the internal speaker.
The query returns “0” or “1”.
Default OFF|0
Front Panel Demod, Demod, AM/FM
Demod Setup, Speaker, On/Off
27. :SYSTem:SPEaker:VOLume
Syntax :SYSTem:SPEaker:VOLume <integer>
:SYSTem:SPEaker:VOLume?
Function Adjusts the volume of the speaker.
Explanations <integer> ranges from 0 to 255.
Default
100
Front Panel Demod, Demod, AM/FM