Rigol DS4000E Series, Programming Manual, Page: 121 / 278

Chapter 2 Command System RIGOL
DS4000E Programming Guide 2-109
:MASK Commands
Command List:

:MASK:CREate

:MASK:DATA

:MASK:ENABle

:MASK:FAILed?

:MASK:MDISplay

:MASK:OPERate

:MASK:OUTPut

:MASK:PASSed?

:MASK:RESet

:MASK:SOOutput

:MASK:SOURce

:MASK:TOTal?

:MASK:X

:MASK:Y
:MASK:CREate
Syntax
:MASK:CREate
Description
Creates the pass/fail test mask according to the current setting.
Remarks

This command is invalid after the pass/fail test operation starts (refer to the :MASK:OPERate
command).

For the horizontal tolerance range in the pass/fail test mask, refer to the :MASK:X command; for the
vertical tolerance range in the pass/fail test mask, refer to the :MASK:Y command.
:MASK:DATA
Syntax
:MASK:DATA <mask>
:MASK:DATA?
Description
Sends or reads the data stream of the pass/fail test mask.
Parameter
Name Type Range Default
<mask> ASCII String Refer to Remarks --
Remarks

<mask> is a binary data block, which consists of the TMC data block header and MASK data.
―
The format of the TMC data block header is #NX…X. Wherein, # is the start identifier of the data
stream; the N figures "X...X"(N≤9) following the start identifier indicate the length of the data
stream (the number of bytes).
For example, #9000001408.
Wherein, N is 9, 000001408 following it represents that the data stream contains 1408 bytes of
effective data.
―
The MASK data is in ASCII format.