Rigol DG952, Programming Manual

Page: 116 / 205

RIGOL Chapter 2 Command System
2-104 DG900 Programming Guide
Remarks

This command is only applicable to the internal modulation source
( [:SOURce[<n>]][:MOD]:FSKey:SOURce ). The FSK modulation rate refers to the frequency at which
the output frequency "shifts" between the carrier frequency and the hop frequency
( [:SOURce[<n>]][:MOD]:FSKey[:FREQuency] ).

When [:SOURce[<n>]] or [<n>] is omitted, the system sets the related parameters of CH1 by default.
Return Format
The query returns the FSK modulation rate in scientific notation, with 7 effective digits. For example,
1.02 (the FSK modulation rate is 150 Hz).
Example
:SOUR1:FSK:INT:RATE 150 /*Sets the FSK modulation rate of CH1 to 150 Hz.*/
:SOUR1:FSK:INT:RATE? /*Queries the FSK modulation rate of CH1 and the query returns
1.02.*/
[:SOURce[<n>]][:MOD]:FSKey:POLarity
Syntax
[:SOURce[<n>]][:MOD]:FSKey:POLarity {POSitive|NEGative}
[:SOURce[<n>]][:MOD]:FSKey:POLarity?
Description
Sets the FSK modulation polarity of the specified channel to Positive (POSitive) or Negative (NEGative).
Queries the FSK modulation polarity of the specified channel.
Parameter
Name Type Range Default
[<n>] Discrete 1|2 1
{POSitive|NEGative} Discrete POSitive|NEGative POSitive
Remarks

When [:SOURce[<n>]] or [<n>] is omitted, the system sets the related parameters of CH1 by default.

In the internal modulation ( [:SOURce[<n>]][:MOD]:FSKey:SOURce ), set the polarity to "Positive",
and the generator will output the carrier frequency when the modulating waveform amplitude is a logic
low level. It will output the hop frequency ( [:SOURce[<n>]][:MOD]:FSKey[:FREQuency] ) when the
modulating waveform amplitude is a logic high level. The situation is the opposite when the polarity is
set to "Negative".

In the external modulation ( [:SOURce[<n>]][:MOD]:FSKey:SOURce ), set the polarity to "Positive",
and the generator will output the carrier frequency when the external input signal is a logic low level.
It will output the hop frequency ( [:SOURce[<n>]][:MOD]:FSKey[:FREQuency] ) when the external
input signal is a logic high level. The situation is the opposite when the polarity is set to "Negative".
Return Format
The query returns POS or NEG.
Example
:SOUR1:FSK:POL POS /*Sets the FSK modulation polarity of CH1 to Positive.*/
:SOUR1:FSK:POL? /*Queries the FSK modulation polarity of CH1 and the query returns POS.*/