LGN Owner's Manual
Cabin Controller
Page 20
LGN-Owners-Manual-071520
AutoStart Features and Operation
AutoStart Feature
–
Time/Day
Allows you to program a day and time for the APU to start automatically, up to 7
days in advance. This feature will run for three hours and shut down. At the end
of the AutoStart program the cabin controller will display the error code #10, “Run
Timeout”; this is normal.
Set Automatic Start-Up/Shut-Down
– Time/Day
The user can adjust the time and day for the next timed AutoStart event. (
SET
symbol is flashing, and
TIME AUTOSTART
symbol is turned on during alarm
setup).
1. Press
AUTOSTART
button. (
Time AutoStart
will scroll across the screen.)
2. Press
SELECT
button to continue,
MODE
to exit.
3. Press LEFT or RIGHT scroll button to adjust
AutoStart hour
as required.
4. Press
SELECT
button.
5. Continue to set the
AutoStart Minutes
and
AM/PM
as you would set the
clock. (See Section:
Clock and Date Set-Up
).
6. Press
SELECT
button after each entry.
7. Press LEFT or RIGHT scroll button to adjust
AutoStart Day
as required.
8. Press
SELECT
button.
9. Press LEFT or RIGHT scroll button to locate
On/Off
.
10. Press
SELECT
button to save settings or press
MODE
button to return to
menu without saving.
NOTE:
When enabled,
Time AutoStart
symbol will be flashing.
AutoStart Feature
–
Temperature
Allows you to program a comfortable temperature setting; the APU regulates the
temperature giving you further fuel savings on extended absences from the cab.
Set Automatic Start-Up/Shut-Down
– Temperature
1. Press
AUTOSTART
button twice. (
Temp AutoStart
will scroll across the
screen.)
