R
ig
ht
CL
IC
K
Arming
You can activate, or arm, the system by pressing
LOCK
on your transmitter for one second.
When system arms you will hear a short siren sound and the hazard lights will flash once. If
the vehicle’s power locks have been connected to the system, the doors will lock and close
electric window (if vehicle has total closure or optional module - windows rollup module - has
been installed)..
While the system is armed, the status LED will flash approximately once per second, indicating
that the system is actively protecting your vehicle. If you hear a second siren sound followed
by 3 chirps, it indicates door (s) not closed properly.
Disarming
To disarm the system press
UNLOCK
. You will hear 2 chirps, and the hazard lights will flash
twice. If power locks are connected to the system, the doors will unlock.
Temporary isolation of shock / ultrasonic sensors
It’s possible to temporarily disconnect the shock and ultra sonic sensors when leaving children
or pets in the car. Press and hold
LOCK
for approx 5 seconds. You will hear 1 chirp, followed
by further 3 chirps and the hazard light will flash three times. This indicates system is fully
armed minus ultra sonic and shock sensors.
Alarm Memory
If any sensor has been activated whilst in armed mode, when disarmed system will indicate
which arming area was triggered.
Alarm Zone Triggered
Normal Arming Mode:
Ultrasonic / Shock Sensor
Siren sound 3 times and hazard light flash 3 times
Door / ignition
Siren sound 4 times and hazard light flash 4 times
Unique Alarm Trip Indicators
System’s siren sounding will tell you how alarm was triggered.
• If a door or ignition was triggered siren will do a continuous blast.
• If one of the Ultra sonic or shock sensors triggered, siren will sound intermittently.
Car Finder
When system is in armed mode, press
LOCK
once, siren sound once, hazard light will flash
once. This feature is particularly useful to find the car in a large car park etc.
page 4
