Step 3
Page 3 OF 3
K&A Manufacturing
(fron the top) on the low corners of the unit.
Phone: 800.298.4351
6703 Zinser Street Schofield, WI 54476
www.raproducts.com
Fax: 866.882.9475
Step 2:
Lower the worksurface to its lowest position.
Place (4) lock washers 2 on (4) socket screws 3 .
Insert these through the holes on the longer sides of the
footshelf brackets 5 and thread them into the weld nuts
1 you inserted into the grooves in step 1. Fully tighten
the socket screws.
Step 3:
With the help of an assistant, lay the work-
station on its back on a protected surface. Attach the
footsheld to the brackets with (10-12) wood screws 4
through the holes in the brackets 5 and into the pilot
holes in the bottom of the footshelf. Stand the work-
station upright in its final position and level it if
by required by turning the leveling glides clockwise
Instruction # 53405
5
2
3
Step 2
4
