A
B
C
D
E
Your worksurface may
be different than the
one shown here.
Side View
(Track wil be at
an angle when
installation is finished.)
E
A
ITEM # PART #
DESCRIPTION
QTY.
A
Varies Track Assembly
1
B
52336 3/16" Aluminum Rivet Washer .198 x .510 x .067
2
C
52678 8-18X1/2 Phillips Pan Self Drill Screw
2
D
51708 M5 x 18mm (7/8") Sq/Ph/Wshr Head Wood Screw
2
E
Varies LT U-channel
1
Page 9 OF 9
K&A Manufacturing
6703 Zinser Street Schofield, WI 54476
Phone: 800.298.4351
Fax: 866.882.9475
www.raproducts.com
Instructions To Install a Track on a Series 4
Workstation:
Step 1:
Place the front of the track
A
against the
bottom of the worksurface and the back of the track
on the angled part of the u-channel.
Instruction # 53244
Step 2:
Align the holes in the track
A
with one set of pilot holes in the u-channel
E
keeping the front of the track 1/8"-5/8" from the front of the worksurface. Place (2) washers
B
on (2) self drilling screws
C
. Drive them through the track and into the u-channel.
Step 3:
Attach the front of the track
A
to the worksurface using (2) wood screws
D
. Do
not over-tighten the wood screws. Use a low torque setting on the power driver.
Step 4:
Complete the installation using the instructions that came with the product you
are installing.
