4
4
1
2
3
Step 2:
With the help of an assistant, place
the modesty panel
1
at the desired location.
It should normally be centered left to right
and away from objects on the underside of
the worksurface that could interfere with the
panel.
Important Note: The worksurface
material must be compatible with the
screws provided. The worksurface must
be at least 1" thick.
Step 3:
Attach the modesty panel to the
underside of the worksurface with (3) wood
screws
4
in each bracket and fully tighten.
No pilot holes are provided.
Center bracket
only provided on
60" or wider
modesty panels.
A
Page 2 OF 2
K&A Manufacturing
6703 Zinser Street Schofield, WI 54476
Phone: 800.298.4351
Fax: 866.882.9475
www.raproducts.com
Tools Required for Assembly:
Power Driver W/Adjustable Torque
#2 Phillips Head Driver Bit or
#2 Square Head Driver Bit
Hardware Pack # 52431
Drawn Actual Size
ITEM # PART #
DESCRIPTION
QTY.
1
Varies Laminate 3/4" Modesty Panel
1
2
800119 Floating Modesty Panel Bracket Right
Varies
3
800248 Floating Modesty Panel Bracket Left
Varies
4
51708 M5 x 18mm (7/8") Sq/Ph/Wshr Head Wood Screw
18
Instruction # 52798
51708
Detail A
Step 1:
Lay the modesty panel
1
on a protected surface
with the pilot holes facing up. Align the holes on the
long side of the modesty panel brackets
2
and
3
with
the pilot holes in the panel. Attach the brackets to the
modesty panel with (3) wood screws
4
in each bracket.
Do not over-tighten the screws. Use a low torque setting
on the power driver. There will be (3) brackets on
modesty panels 60" wide or wider.
