ASSEMBLY INSTRUCTIONS
01
. Release and remove the M12 wing nut (A),
but leave the corresponding washer
on the half clamp hook. Release and remove the
mounting screw with washer, spring washer
and wing nut (B).
02
. Attach the M12 locking nut (C) instead of
the M12 wing nut on the half clamp hook. Assemble
the M8 and M10 cylinder screws with the
corresponding lock washers (D).
A
B
C
D
03
. Depending on which fastening thread (mounting hole) is available on the loudspeaker, insert either the M8 (E) or the
M10 (F) cylinder screw with lock washer into the corresponding hole in the half clamp hook.
E
F
