2
Recommended Use
The SoloVest Adapter allows the use of a SoloVest with lifts and overhead track
systems that use a spreader bar.
Operation
Position the SoloVest around the client and tighten the straps. (Refer to SoloVest
section of product guide for correct positioning and sizing). Clip the SoloVest
Adapter to the spreader bar or lift. Lower the lift until the adapter strap is hanging
behind the SoloVest. Clip the SoloVest onto the two middle rings of the adapter
strap.
Before Every Transfer
Assess whether additional caregivers are needed.
•
Ensure the SoloVest is positioned correctly and adjusted tightly.
•
Lock wheels on client equipment during transfers.
•
During Each Transfer
At the beginning of each transfer, while the client is still seated and the straps
•
are taut, check that the SoloVest does not slide up or cause discomfort.
Lift the client only high enough to perform the transfer.
•
Inspection
Check periodically for:
Damage or wear to the SoloVest or SoloVest Adapter.
•
Remove the product from service when any condition develops that might make
•
operation unsafe.
Solo
Vest
Adapter
Warning: See Product Guide
for Specific Safety Information
1
2
3
4
5
6
7
8
9
10
11
12
09
10
11
12
13
14
www.rifton.com
Rifton NY 12471
R704
Max. Wt. 350 lbs
(160 kg)
