background image

8

Figure 8a

Figure 8b

Pivot Confi guration

Figure 8a: 

The trunk board can rotate to 

facilitate transfers to a stationary toilet. 
This feature does not function with the 
kneeboard attached. The trunk board must 
be horizontal before using the pivoting 
feature.

Figure 8a: 

The rotation of the trunk board 

can be set in 15˚ increments using the pivot 
latch. Press down on the pivot latch handle 
(A) fi rmly while rotating the trunk board. 
Release the latch and allow it to engage 
into the nearest position. The trunk board 
can be rotated 180 degrees. 

Removal of kneeboard

Figure 8b: 

To remove the kneeboard, 

pull out the four quick-release pins (B) 
underneath the trunk board. To install the 
kneeboard, line up the braces and insert 
the pins.

Accessories     

Handholds

Figure 8c: 

The handholds can be secured 

in the slots of the trunk board for users 
who require a vertical hold. To attach the 
handhold, remove the nut from the bottom 
and assemble it again through the slot in 
the trunk board.

Support strap

To avoid falls or injury, 
adult supervision is 

required at all times. The support strap 
is not a substitute for close caregiver 
supervision. 

Figures 8d and 8c: 

The support strap (C) 

can be secured around the user’s trunk to 
help maintain position on the trunk board. To 
attach the strap on the trunk board, fasten 
the short straps (D) around the edge of the 
trunk board and through the hand slot.

B

B

A

A

Figure 8c

Figure 8d

Figure 8e

C

C

D

D

 

WARNING

Summary of Contents for K710













Reviews: