16
Attaching the Rifton toilet
seat on the mounting bar
Unscrew the nuts under the toilet bowl rim,
which fasten the toilet seat and lid to the
toilet. Remove the seat and lid.
Place two of the rubber washers (A)
provided with the mounting bar (the third
is a spare) over the two holes (see Figure
16a). Place the mounting bar over the
washers with the safety label face-up.
Replace the seat and lid with the bolts
going through the holes in the mounting
bar, the washers, and the holes in the
toilet. Replace the nuts (B) and tighten
fi rmly (see Figure 16a).
Adjust the Rifton toilet seat back to the
forward leaning position (see Figure 16b).
With the front of the seat facing towards
you, and tilted up, hook the black plastic
hooks (D) at the back of the seat into the
holes (C) in the mounting bar. Lower the
front of the seat onto the toilet. Be sure
that Rifton toilet seat hooks are securely
in the holes of the mounting bar
(see Figure 16c).
Figure 16a
Figure 16b
Figure 16c
A
A
C
C
D
D
B
B