• Screw plate must be removed on models with a rein-
forced muzzle.
• Slide wishbone line through the narrow opening at the
muzzle end and down into the horizontal muzzle opening
one at a time.
• Wet bands with water and soap and slide through
muzzle opening and position equally. Wishbone line is
now pointing toward butt of gun
• Muzzle reinforcement screw plate (on models that
apply) must be reinstalled prior to loading gun.
Power Band Installation
• Install spearshaft under power bands and onto track
located on top of the speargun stock,
ensuring loading tabs on shaft are pointed up
(for both open and closed track).
• Slide spearshaft end into mechanism giving a firm
push to overcome spring tension, locking shaft into
position. Push and pull on spearshaft to ensure full
trigger engagement.
• Do not slam spearshaft into position. This may
damage firing mechanism.
• Do not use shooting line to pull shaft into
mechanism.
• Now engage safety and rig your line.
• We recommend traveling with shaft out of track. If
transporting speargun with engaged shaft, make sure
spearshaft is secure to the speargun barrel with Velcro
Strap to prevent damage to spearshaft and mechanism.
• Do not drop or hit spearshafts. This could fracture or
weaken at the loading notch area.
Installing / Engaging Shaft