STEP 1
Lay out all components and hardware to ensure that you have all components and
hardware listed on the parts page .
STEP 2
Position two Crossbar rails (#2) on its side.
Place one Lift column (#5) on the
Crossbar rails.. Line up the holes on the
Lift column with the holes on each
Crossbar rails.
Insert four M6 x 12 screws ( #10) and
tighten them.
Position one Side bracket (#4) on the leg
side as shown .
Insert two M6x12 screws (#10) and
tighten the screws.
STEP 3
Attach a Foot (#6) with four M6x12 Machine
Screws (#10) and tighten screws in a cross pattern.
Position two Leveling feet (#9) on the foot and
tighten them.
