RIEXINGER BSM 1000, Operating Manual

Page: 39 / 86

7. Operation 37
7.7 Setting the sawing angle
Pos. Description
1 Angle scale
2 Reference pointer
3 Quick-tensioning lever
Fig. similar
Danger!
Running saw band may cause serious severance injury!
The swivel-mounted saw bow may pose pinch point hazard!
l
The machine may only be operated by one person.
l
The sawing angle may only be adjusted when the machine motor is turned
off.
l
Before setting the sawing angle, the operator must ensure that the area
behind the workpiece and the work area are clear.
l
The operator must ensure that saw band is above the workpiece.
Mitre cuts
The BSM 631 / BSM 800 / BSM 1000 has a mitre range of 45 degrees on both
sides.This allows the operator to e.g. saw pipe segments without having to turn
or move the workpiece.
1) If the saw band is below the upper workpiece edge, raise the saw bow by pressing and hold-
ing the button
Lift up .
2) Press the Emergency Off-Button , so no one accidentally turns on the machine motor.
3) Move possibly the right tension arm of the quick-release mechanism so far to the left or the
left part of the pipe support to the right that they do not collide when setting the saw angle with
the saw frame (see Chap. 7.8 on p. 38)
BSM 631 / BSM 800 / BSM 1000