9.3 It is not recommended to install CN-Repeator at the following
places:
- on massive metal constructions and closer than 1 m to them;
- closer than 1 m to lines of force as well as water or gas pipes;
- near sources of interference;
- inside metal constructions.
9.4 Power supply wires should be located far enough from the
power cables. Install CN-Repeator in such a position, that antenna
has vertical orientation.
10
Transferring Control over Detectors to CN-Repeator
Transferring control over detectors to CN-Repeator is fulfilled in
accordance with a «CN-Contact-R» protocol ver. 6 and higher.
11 Firmware Update
Update of an internal software is carried out by means of PC with
«Ladoga-RK» Configurator installed. Before connecting to the PC via
USB interface unit, disconnect CN-Repeator external and reserve
power supply and then install jumper on «Reset» contacts.
12 Storage and Transportation
12.1 The CN-Repeator in original package may be transported by any
transport facility in closed vehicles over any distances in compliance
with the existing shipping rules concerning the respective means of
transport.
12.2 The storage room shall be heated and ventilated, as well as
free from current-conducting dust, acid vapors, alkali and gases that
cause corrosion and destroy insulation.
13 Manufacturer’s Guarantees
13.1 «RIELTA»
JSC guarantees conformity of the Detector to it’s
Technical Specifications if conditions of transportation, storage,
assembling and operation are observed. The guaranteed storage period
is 63 months since the date of manufacturing the Detector.
13.2 The guaranteed period of operation is 60 months since the date
of commissioning within the storage period guaranteed.
13.3 For guaranteed maintenance, please contact:
«С.Nord» STCF
Russia, 190020, St. Petersburg,
Obvodny Channel emb., 199-201, build.13, BC «Obvodny Dvor»
Phone: (812) 327-16-36
E-mail: [email protected], [email protected], www.cnord.ru
14 Packing Certificate
Wireless zone extension repeater «CN-Repeator» has been
manufactured in compliance with the active technical documentation
and classified as fit for operation and packed by «RIELTA» JSC.
Packing date _______________________________
month, year
Rev. 3 of 10.06.2016
№00113
By order of «С.Nord» STCF, www.cnord.ru
Russia, 190020, St. Petersburg,
Obvodny Channel emb., 199-201, build.13, BC «Obvodny Dvor»,
Phone: (812) 327-16-36, [email protected]
Technical support: [email protected], http://support.cnord.ru
Made in Russia
The Manufacturer: «RIELTA» JSC, www.rielta.com
Russia, 197101, St. Petersburg, Chapaeva str., 17
Phone /fax: +7 (812) 233-03-02, 703-13-60, [email protected]
Technical support: phone +7 (812) 233-29-53, 703-13-57, [email protected]
