9
20017376
GB
Installation
5.4
Heat generator plate
Drill the combustion chamber locking plate as shown in Fig. 4.
The position of the threaded holes may be marked using the gas-
ket joint supplied with the burner.
5.5
Securing the burner to the boiler
To install, proceed as follows:
fasten the burner 1)(Fig. 5) to the boiler's door 2) by means
of four screws and (where necessary) 4 nuts M8, placing the
insulating gasket 3) between the two.
5.6
Probe and electrode positioning
Before installing the burner on the boiler, make sure the probe
and electrode are positioned correctly as in Fig. 6.
170
190
4
5
10
145
Fig. 4
D7449
Fig. 5
2
3
1
D8611
WARNING
Do not turn the electrode: position it as illustrated.
Placing the electrode near the ionization probe
may result in the control box amplifier being dam-
aged.
Fig. 6
218
16
15-
4-
5
5- 7
Probe
D8616
Electrode
