Riello RS 1000/E C01, Installation, Use And Maintenance Instructions

Page: 16 / 52

20061994 14 GB
Technical description of the burner
Electrical connection of flame detector
It is important for signal transmission to be almost totally free
of any disturbances or loss:
• always separate the detector cables from the other cables:
– Line capacitance reduces the magnitude of the flame signal.
– Use a separate cable.
• Respect the allowed cable lengths.
Technical data
Tab. G
LMV51... basic unit Mains voltage AC 230V -15% / +10%
Mains frequency 50 / 60 Hz ± 6%
Power absorption < 30W (normal)
Safety class I, with components in compliance with II and III, according to
DIN EN 60730-1
Load on
‘input’ terminals F1 unit fuse (internal) 6.3 AT
Primary perm. mains fuse (external) Max. 16 AT
Undervoltage
• Safety switch-off from operating position to
mains voltage
• Restart when mains voltage picks up
< AC 186V
> AC 188V
Oil pump / magnetic clutch (nominal voltage)
• Nominal current
• Power factor
2A
cos
ϕ
> 0.4
Air pressure switch test valve (nominal voltage)
• Nominal current
• Power factor
0.5A
cos
ϕ
> 0.4
Load on
‘output’ terminals Total load on the contacts:
• Mains voltage
• Total unit input current (safety circuit)
load on contacts due to:
- Fan motor contactor
- Ignition transformer
- Valve
- Oil pump / magnetic clutch
AC 230V -15 % / +10%
Max. 5 A
Single contact loading:
Fan motor contactor (nominal voltage)
• Nominal current
• Power factor
1A
cos
ϕ
> 0.4
Alarm output (nominal voltage)
• Nominal current
• Power factor
1A
cos
ϕ
> 0.4
Ignition transformer (nominal voltage)
• Nominal current
• Power factor
2A
cos
ϕ
> 0.2
Fuel gas valve (nominal voltage)
• Nominal current
• Power factor
2A
cos
ϕ
> 0.4
Fuel oil valve (nominal voltage)
• Nominal current
• Power factor
1A
cos
ϕ
> 0.4
Cable lengths Main line Max. 100m (100 pF/m)
Environmental
conditions Operation
Climatic conditions
Mechanical conditions
Temperature range
Humidity DIN EN 60721-3-3
Class 3K3
Class 3M3
-20...+60°C
< 95% RH