Riello Gulliver BS1/M, Installation, Use And Maintenance Instructions

Page: 18 / 36

20096985
16 GB
Installation
5.4.2 Control of burner characteristics
Check the identification label of the burner (Fig. 6), showing:
A
the burner model;
B the burner type;
C the cryptographic year of manufacture;
D the serial number;
E the data for electrical supply and the protection level;
F the electrical power consumption;
G the data of the burner's minimum and maximum output pos-
sibilities (see Firing rate)
Warning. The burner output must be within the boiler's firing
rate.
5.5 Operating position
WARNING
A burner label that has been tampered with, re-
moved or is missing, along with anything else that
prevents the definite identification of the burner
makes any installation or maintenance work diffi-
cult.
WARNING
The figure of the label (Fig. 6) is indicative. Some
of the data may be arranged in a different position.
R.B.L.
TIPO TYP
TYPE
II2ELL 3B/P DE
II2H3B/P
AT,CH,IS II2H3 GB,IE,IT
N2L3B/P LU
GAS
GAZ
FAM.2
FAM.3
I2E(P)B.I3 BE
II2L3B/P NL
II2Er3P FR
Icc A
Imax A
PESO kg
RIELLO S.p.A.
I-37048 Legnago (VR)
A B
F
B
G
D
E
C
Fig. 6
20098188
WARNING
➤
The burner is set up to operate only in posi-
tions 1, 2, 3, 5, 6 and 7 (Fig. 7).
➤
Installation 1 is preferable, as it is the only
one that allows the maintenance operations
as described in this manual.
➤ The installation layout illustrated in position 5
is only possible using the “MULTI-BLOC rota-
tion kit”, to be ordered separately.
DANGER
➤
Any other position could compromise the cor-
rect operation of the appliance.
➤
Installation 4 are forbidden for safety rea-
sons.
Fig. 7
D4450
2 3 4
5
1
6 7