12
USE
9
The compressor activates 3 minutes after unit activation.
2.3 Use with closed flap
Door CloSED
1 Display
2 Smart button
3 Quick function keys
4 On- Off key
1
4
2
3
When the door is closed, you can activate the quick functions,
such as choosing the operating mode and setting the desired
temperature.
9
Ensure that the door is fully closed. If this is not the case, the
external keys will not work.
Cooling mode
The Cooling mode allows starting and use of the air condition-
er as a producer of cold and dehumidified air. To activate this
function an external temperature b10 ° C and 46 ° C is
recommended.
Required ambient temperature available range is between 16 °C
and 30 °C.
•
Activation
—
press
appears on the display of the remote control and the unit.
Set required temperature as follows:
—
work on
Value is stored with no need to press other buttons.
•
Switch-off
—
select another operating mode
Alternatively:
—
press
to deactivate
Heating Mode
The Heating mode allows starting and use of the air conditioner
as a hot air producer. To activate this function an external tem-
perature between -25 °C and 16 °C.
Required ambient temperature available range is between 16 °C
and 30 °C.
•
Activation
—
press
appears on the display of the remote control and the unit.
Set required temperature as follows:
—
work on
Value is stored with no need to press other buttons.
•
Switch-off
—
select another operating mode
Alternatively:
—
press
Dehumidification mode
Dehumidification mode allows starting and using the system to
reduce ambient humidity.
Required ambient temperature available range is between 16 °C
and 30 °C.
The equipment will operate at displayed ventilation speed.
When the delta between ambient temperature ad set tempera-
ture is below two degrees, the equipment will operate intermit-
tently at the minimum ventilation speed.