35
ACCESSORIES
For the accessories, see the catalogue.
To install the accessories, follow the instructions included in the relevant package.
POSITIONING
The location for the unit must be determined by the system designer or a competent person and it must
take into account the technical requirements and the standards and regulations in force; generally, special
permissions need to be obtained. (e.g.: regulations concerning zoning, architecture, fires, environmental
pollution, noise emission, etc.)
It is therefore advisable, before installing the unit, to request and obtain the necessary permissions.
For proper installation always observe the following minimum requisites:
position the unit on a dry level surface capable of sustaining its weight;
respect the distances in order to allow for a correct flow of air and normal cleaning and maintenance
operations;
position the unit in a place that makes water and electrical connections convenient;
be close to an electric socket;
It is also necessary to make sure that:
The temperature range for use is between -15 and +40 °C.
It is forbidden to install it:
in places where there are aggressive atmospheres;
in narrow places where the noise created by the generator could be amplified by reverb or
resonance;
in corners where there is a deposit of dust, leaves and anything that may reduce the efficiency of the
unit by blocking the air passage.
WARNING!!!
The unit is normally installed on a shelf in a higher position as shown in the following figures. In this case
make sure that the shelves are attached to a suitable structure by means of suitable fixing
elements.
The unit features a helical fan and it is therefore suitable to be connected to ducts with important load
losses. For special requirements, consult the Manufacturer.
