background image

20146122

GB

Contents

1

Declarations................................................................................................................................................................................ 3

2

Information and general warnings............................................................................................................................................ 4

2.1

Information about the instruction manual .................................................................................................................... 4

2.1.1

Introduction.................................................................................................................................................................. 4

2.1.2

General dangers.......................................................................................................................................................... 4

2.1.3

Other symbols ............................................................................................................................................................. 4

2.1.4

Delivery of the system and the instruction manual...................................................................................................... 5

2.2

Guarantee and responsibility....................................................................................................................................... 5

3

Safety and prevention................................................................................................................................................................ 6

3.1

Introduction.................................................................................................................................................................. 6

3.2

Personnel training ....................................................................................................................................................... 6

4

Technical description of the burner ......................................................................................................................................... 7

4.1

Burner designation ...................................................................................................................................................... 7

4.2

Models available.......................................................................................................................................................... 7

4.3

Burner categories - Countries of destination ............................................................................................................... 7

4.4

Technical data ............................................................................................................................................................. 8

4.5

Maximum dimensions.................................................................................................................................................. 8

4.6

Firing rate .................................................................................................................................................................... 9

4.6.1

Test boiler.................................................................................................................................................................... 9

4.6.2

Commercial boilers...................................................................................................................................................... 9

4.7

Correlation between gas pressure and burner output ................................................................................................. 9

4.8

Burner description ..................................................................................................................................................... 10

4.9

Burner equipment...................................................................................................................................................... 10

4.10

Electrical control box ................................................................................................................................................. 11

4.11

Actuator ..................................................................................................................................................................... 12

5

Installation ................................................................................................................................................................................ 13

5.1

Notes on safety for the installation ............................................................................................................................ 13

5.2

Instructions to avoid burnout or bad combustion of the burner ................................................................................. 13

5.3

Handling .................................................................................................................................................................... 13

5.4

Preliminary checks .................................................................................................................................................... 14

5.4.1

Control of the supply ................................................................................................................................................. 14

5.4.2

Control of burner characteristics ............................................................................................................................... 14

5.5

Operating position ..................................................................................................................................................... 14

5.6

Securing the burner to the boiler ............................................................................................................................... 15

5.6.1

Hinge installation ....................................................................................................................................................... 15

5.7

Positioning the probe - electrode............................................................................................................................... 15

5.8

Combustion head adjustment.................................................................................................................................... 16

5.9

Air damper adjustment .............................................................................................................................................. 16

5.10

Gas feeding ............................................................................................................................................................... 17

5.10.1

Gas feeding line ........................................................................................................................................................ 17

5.10.2

Gas train.................................................................................................................................................................... 17

5.10.3

Gas train installation.................................................................................................................................................. 18

5.11

Electrical wiring ......................................................................................................................................................... 19

5.11.1

Notes on safety for the electrical wiring..................................................................................................................... 19

5.11.2

Control box ................................................................................................................................................................ 19

5.11.3

Electrical diagram...................................................................................................................................................... 20

5.12

Operating programme ............................................................................................................................................... 21

5.13

Table of times............................................................................................................................................................ 22

5.13.1

Operating status indication........................................................................................................................................ 22

5.13.2

Fault diagnostics - lockouts ....................................................................................................................................... 23

5.13.3

Checking the gas pressure switch............................................................................................................................. 24

5.13.4

Checking the air pressure switch .............................................................................................................................. 24

5.13.5

Shut-down test .......................................................................................................................................................... 24

5.13.6

Intermittent operation ................................................................................................................................................ 24

5.13.7

Recycle and limit of repetitions.................................................................................................................................. 24

5.13.8

Presence of an extraneous light or parasite flame .................................................................................................... 24

5.13.9

Duration of ignition transformer discharge ................................................................................................................ 25

5.13.10 Reset by button and remotely of the burner .............................................................................................................. 25
5.13.11 Protection reset ......................................................................................................................................................... 25
5.13.12 Reset button/Remote reset fault................................................................................................................................ 25
5.13.13 External lockout signal (S3)....................................................................................................................................... 25

Summary of Contents for 3755219









































Reviews: