11
20197230
GB
Installation
5.4
Preliminary checks
Checking the consignment
Checking the characteristics of the burner
Check the identification label of the burner, showing:
the model
A
)
(Fig. 5) and type of burner
B
);
the year of manufacture, in cryptographic form
C
);
the serial number
D
);
the electrical power consumption
G
);
the types of fuel used
I
);
the data of the burner's possible minimum and maximum out-
put
E
);
the data for electrical supply
F
);
the protection level
H
);
maximum current in case of failure
L
);
maximum operating current
M
);
burner weight
N
).
5.5
Operating position
CAUTION
After removing all the packaging, check the integ-
rity of the contents. In the event of doubt, do not
use the burner; contact the supplier.
The packaging elements (wooden cage or card-
board box, nails, clips, plastic bags, etc.) must not
be abandoned as they are potential sources of
danger and pollution; they should be collected and
disposed of in the appropriate places.
WARNING
The output of the burner must be within the
boiler's firing rate.
WARNING
A burner label that has been tampered with, re-
moved or is missing, along with anything else that
prevents the definite identification of the burner
makes any installation or maintenance work diffi-
cult.
Fig. 5
20183044
WARNING
The burner is designed to work only in positions
1
.
Installation
1
is preferable, as it is the only one that
allows the maintenance operations as described
later in this manual.
WARNING
Any other position could compromise the correct
operation of the appliance.
Installations
2
,
3
,
4
and
5
are forbidden for safety
Fig. 6
1
2
3
4
5
20192555
Summary of Contents for 3749251
Page 2: ...Original instructions...
