15
ENGLISH
DISPLAY AND PROGRAMMING
Display
The display (1), with full text and graphics mode, is
self-explanatory to all intents and purposes, making the
controller easy to use.
The LED (2) lights up green when a relay is activated.
The LED (2) lights up red when the operating mode is
"Off".
The LED (2) blinks red slowly when the operating mode
is “Manual”.
The LED (2) blinks red fast when an error occurs.
Commands are entered using four keys (3) and (4), which
are assigned context-sensitive functions. The “esc” key
(3) is used to cancel a command or exit the current menu.
When changes have been made and are applicable, the
controller will prompt for confirmation to save.
The function of each of the other three keys (4) is shown in
the display line immediately above; the right-hand key is
generally used to confirm and select input data.
Examples of key functions:
+/- = increase/decrease values
▲
/
▼
= scroll menu up/down
yes/no = confirm/cancel
Info = additional information
Back = return to previous screen
ok = confirm selection
Confirm = confirm setting
Finally, accessing menu 3.2 and selecting “Manual”
mode, the installer can test the various outputs with the
components connected, and verify whether or not the
readings from the sensors are reliable. This done, auto-
matic mode can be re-activated.
b
Observe the indications for individual parameters given on the following pages, and check whether or not further
settings are needed for the particular application.
MENU SEQUENCE AND MENU STRUCTURE
Graphics or "overview” mode will appear if no key is
pressed for a period of 2 minutes, or if "esc" is pressed to
exit the main menu.
Pressing a key in graphics or overview mode takes you
directly to the main menu.
Meaning of symbols in the display:
Pump (revolves with pump in operation)
Flow meter
Heat exchanger
Temperature sensor
Warning / Error message
Information
Valve (black in direction of flow)
Thermostat
esc
(1)
(2)
(3)
(4)
Exit main menu
OK
esc
1.Measured values
2.Statistics
