- 21 -
M
EASUREMENT DISPLAY AREA
The front panel can be used to display important UPS operating information. When the UPS is switched-on, the display shows
the main voltage value.
To display a different measurement, press the “SEL” button repeatedly until the desired measurement appears.
In the event of a fault/alarm (FAULT) or a lock (LOCK), the display will automatically show the type and code of the
corresponding alarm.
Some examples are shown below:
GRAPHIC EXAMPLE
(1)
DESCRIPTION
GRAPHIC EXAMPLE
(1)
DESCRIPTION
Mains voltage
Residual battery
autonomy
Mains frequency
Battery charge
percentage
UPS output voltage
Total battery voltage
Output voltage frequency
Applied load percentage
Fault / Alarm
(2)
: the
corresponding code is
displayed
Current absorbed by the
load
Lock
(2)
: the corresponding
code is displayed
UPS internal
temperature
(1)
The values shown in the images in the table are purely as an indication.
(2)
The FAULT / LOCK codes can only be displayed if they are active (presence of a fault/alarm or a lock).
