Riello UPS MDU, User Manual, Page: 27 / 32

27
C
OMMUNICATION
M
ONITORING
S
OFTWARE
PowerShield
3
software ensures an effective and user-friendly remote monitoring, via serial line or via ethernet, of the Multi Socket
PDU.
It can also automatically sends e-mails, sms and network messages when specific user-selected events occur.
To monitor the Multi Socket PDU via ethernet you must use the optional network card NetMan 204 purchase
separately.
The software can be downloaded from the website www.riello-ups.com
USB
AND
RS232
PORT
If the RS232 communication port is used, it is not possible to communicate with the USB port and vice versa.
It is advisable to use a cable which is shorter than 3 metres for communication via USB o RS232.
RS232 USB
PIN # NAME TYPE SIGNAL PIN # SIGNAL
1 1 VBUS
2 TX OUT Serial line TX 2 D-
3 RX IN Serial line RX 3 D+
4 4 GND
5 GND POWER
6 +12V POWER
7
8
9
C
OMMUNICATION
S
LOT
The Multi Socket PDU is equipped with an expansion slot for accessory communication boards like, for example, network board
NetMan 204
For further information on the accessories available, visit the web site www.riello-ups.com.
To insert the board, unscrew the slot cover and carefully insert into the slot.