2323
1
GB
INDEX
1.
BURNER DESCRIPTION
1.1 BURNER EQUIPMENT
Flange with insulating gasket . . . .No. 1
Screw and nuts for flange to be fixed to boiler . . . No. 4
Screw and nuts for flange . . . . . .No. 1
Flexible oil pipes with nipples . . . . . . . . . . . . . . . . No. 2
7 pin plug
(only for code 3737055 - 3737056 - 3737455)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
1.
BURNER DESCRIPTION . . . . . . . . . . . .
1
1.1
Burner equipment. . . . . . . . . . . . . . . . . .
1
2.
TECHNICAL DATA . . . . . . . . . . . . . . . .
2
2.1
Technical data . . . . . . . . . . . . . . . . . . . .
2
2.2
Overall dimensions. . . . . . . . . . . . . . . . .
2
2.3
Firing rates. . . . . . . . . . . . . . . . . . . . . . .
2
3.
INSTALLATION . . . . . . . . . . . . . . . . . . .
3
3.1
Boiler fixing . . . . . . . . . . . . . . . . . . . . . .
3
3.2
Fuel supply . . . . . . . . . . . . . . . . . . . . . .
3
3.3
Hydraulic systems . . . . . . . . . . . . . . . . .
4
3.4
Electrical wiring . . . . . . . . . . . . . . . . . . .
5
4.
WORKING . . . . . . . . . . . . . . . . . . . . . . .
6
4.1
Combustion adjustment. . . . . . . . . . . . . .
6
4.2
Electrodes adjustment. . . . . . . . . . . . . . .
8
4.3
Flame detector adjustment . . . . . . . . . . .
8
4.4
Fuel heating . . . . . . . . . . . . . . . . . . . . . .
8
4.5
Burner start-up cycle . . . . . . . . . . . . . . . .
9
5.
MAINTENANCE . . . . . . . . . . . . . . . . . . .
9
6.
FAULTS / SOLUTIONS. . . . . . . . . . . . . . 10
■
BUWAL approval No. 198014.
■
CE Certification No. : 0036 0232/98 (370T1) – 0036 0233/98 (374T1), as 92/42/EEC.
■
The burner meets protection level of IP 40, EN 60529.
■
Burner with CE marking in conformity with EEC directives: EMC 89/336/EEC, Low Voltage 73/23/EEC,
Machines 98/37/EEC and Efficiency 92/42/EEC.
One stage light oil burner with low pollutant emissions (Nitric Oxide NOx, Carbon monoxide CO and unburnt
Hydrocarbons), in conformity with the environmental mark “Blauer Engel” RAL-UZ9, Edition February 2001.
1 – Oil pump
2 – Air damper adjustment
assembly
3 – Nozzle holder assembly
4 – Flange with insulating gasket
5 – Control-box
6 – Reset button with lock-out lamp
7 – Flame detector
Fig. 1
S7366