manualshive.com logo in svg

RIEJU MARATHON 125 AC, Owner'S Manual, Page: 19 / 40

Share
Download
RIEJU MARATHON 125 AC Owner'S Manual Download Page 19

THROTTLE TWIST GRIP

Ensure it works correctly, by turning the
grip and verifying if the free play is correct.
The grip should return to closed position
when released.

LIGHTS, INDICATORS AND 
WARNING LAMPS

Check operation of all lights, and direction
indicators. Replace bulbs as necessary. 

TYRES

The tyre pressure directly effect the road holding ride comfort and braking distance, the, therefore check
the tyre pressures regularly for your own safety. Make sure that the rim is central and not damaged, as
well as the wear on the tyres. Do not overload the vehicle as this will effect stability, and increases tyre
wear.

CAUTION: when the pressure is very
high, the tyres can no longer absorb
any shocks, transmitting any road sur-
face defects directly to the chassis,
handlebar and rider.

15

Tyre

Front

Rear

MRT

1,7 Kg/Cm2

1,8 Kg/Cm2

MRT-SM

1,8 Kg/Cm2

1,9 Kg/Cm2

PRESSURES

manual usuari mtr 125 ang ok.qxp  17/10/2012  12:14  Página 15

Summary of Contents for MARATHON 125 AC









































Reviews:

No comments