01-000HB03EG-A10
SmartPanels 1.0 User Manual
© May 2019 Riedel Communications GmbH & Co. KG. Alle Rechte vorbehalten.
Dieses Handbuch ist urheberrechtlich geschützt. Das Kopieren, Vervielfältigen, Übersetzen oder Umsetzen in irgendein elektronisches Medium
oder maschinell lesbare Form im Ganzen oder in Teilen ohne vorherige schriftliche Genehmigung von Riedel ist nicht gestattet.
Riedel übernimmt keine Gewähr für die Richtigkeit des Inhalts dieses Handbuchs.
Die Rechte an anderen in diesem Handbuch erwähnten Marken- und Produktnamen liegen bei ihren Inhabern und werden hiermit anerkannt.
This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Changes or modifications made to this equipment not expressly approved by Riedel may void the FCC authorization to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This device is granted pursuant to the Japanese Radio Law (
) and the Japanese Telecommunications Business Law (
).
This device should not be modified (otherwise the granted designation number will become invalid).
The device conforms to the following EU guidelines
as attested by the CE mark.
·
EMC 2014/30/EU
·
LVD 2014/35/EU
·
RoHS 2011/65/EU
YFJRSP1232HL (1200 series SmartPanel RSP-1232HL)
Standards
·
CAN ICES-3 (B)/NMB-3(B)
·
EN 50581:2012
·
EN 55032: 2015
·
EN 55035-2:2017
·
EN 61000-3-2:2014, EN 61000-3-3:2013
·
EN 61000-4-2:2009, EN 61000-4-3:2006+A1:2008+A2:2010,
EN 61000-4-4:2012, EN 61000-4-5:2014, EN 61000-4-6:2014,
EN 61000-4-8:2010, EN 61000-4-11:2004
·
IEC/EN 60950-1:2005+A1:2009+A2:2013
·
IEC/EN 62368-1:2014, UL/CSA 62368-1:2014
Industry
Canada
8706A-RSP1232HL (1200 series SmartPanel RSP-1232HL)
MIC
Marking
0
1
-0
0
0
H
B
0
3
E
G
-A1
0
