61
Bolero User Manual A20
PoE+ (IEEE 802.3at)
Required to power the device without external PSU.
·
Provides up to 30 W of power per port
·
Antenna can be powered from the switch
Please note that the most switches do not power
all ports simultaneously. The power supply limits
the total power.
When using Power over Ethernet use
PoE+ switches only.
IGMP snooping (v2)
Required on every switch.
·
Multicast traffic only reaches ports that
explicitly ask for it
·
Also prevents Artist CPU card from being
flooded with Bolero traffic
Please note the limit of Multicast groups of a
switch. Bolero needs 6+[amount of Beltpacks]
Multicast groups (example: 42 Beltpacks require
48 Multicast groups). Cascading of switches does
not raise the system limit. The lowest supported
number in the complete system is the limit.
QoS (IEEE 802.1p), based on DiffServ (RFC 2474)
·
Traffic from the Bolero Antennas can be
prioritized when transmitted through a larger
network.
·
Extremely important when the network
contains more than one switch.
·
Prioritization on:
a. PTP [E, F]
b. AES67 [AFU1]
