AIR Series
Riedel Communications’ AIR series headset is the ideal light weight, low
profile headset for customers who place great demands on quality, design and
comfortable wearing.
Replacing the Ear Cushion
Hold the earpiece and pull the
cushion off. Place the new cushion
on the earpiece and click it carefully
into place.
The specially engineered DuPont
CoolMax
®
fibers used in Riedel’s ear
cushions provide great breathability
and comfortable wearing.
Personalization
You can put a name plate in the inside of the headband. Just lift the plastic cover,
insert your label, and click it back into place.
Pin Out
XLR 4F
Black
GND / Screen
1
Red
Microphone
2
Blue
Speaker -
3
White
S
4
Specifications
Headphone
AIR (E1/E2)
AIR (D1/D2)
Transducer type
Dynamic, open
Dynamic, open
Frequency response
100 Hz – 18 kHz
100 Hz – 18 kHz
Impedance
150 Ω 1 mW/1 kHz
150 Ω 1 mW/1 kHz
Characteristic SPL
91 dB 1 mW/1 kHz
91 dB 1 mW/1 kHz
Microphone
Transducer type
NC Electret
NC Dynamic
Polar pattern
Bi-Directional
Hypercardioid
Frequency response
150 Hz – 15 kHz
150 Hz – 10 kHz
Nominal Impedance
>1600 Ω
200 Ω
Supply voltage
4.5 V 400 µA
---
Sensitivity
-51 dB +/-2 dB
(0 dB=1 V/Pa, 1 kHz)
-62 dB +/-4 dB
(0 dB=1 V/Pa, 1 kHz)
Spare Parts and Service
Please contact your local dealer or Riedel Service (www.riedel.net) for spare parts
and/or service enquiries.
Manufacture Declaration
CE Approval
Riedel Communications declares that this device is in compliance with the
applicable CE standards and regulations.
WEEE Declaration
Please dispose of this product by bringing it to your local collection point or
recycling center.
