Ridley Acoustics KVW834
This speaker is an 8" electrodynamic
loudspeaker system designed to be flush
mounted in a wall or panel. A retro-fit clamping
ring for mounting into an existing wall is
included. A new construction rough-in kit is
available as an optional accessory.
The loudspeaker mounts in an opening
accessible from the front without access to the
rear. The speaker has an overlapping edge
capable of covering discrepancies in the
mounting opening.
The loudspeaker has a perforated metal
grille to protect the driver and is removable for
servicing. All surfaces of the speaker in the
room are paintable.
The frame is of ABS material that is heat
resistant up to 120 degrees. The loudspeaker
is designed so as to perform correctly in an
infinite baffle design requiring no rear chamber.
The loudspeaker is comprised of a low
frequency driver, a separate midrange driver
and a separate high frequency driver. The low
frequency driver is manufactured with a woven
Kevlar cone, phase plug pole piece extension,
and butyl surround. The midrange and pivoting
high frequency drivers are soft textile domes
with 1 1/4" and 1" diameter voice coils,
respectively, for safe power handling capacity.
The crossover is a 2nd order network (12 dB/
oct) and delivers three specific ranges of
frequencies to each the woofer, midrange and
the tweeter. It also has a polyswitch protection
circuit which is non-mechanical and self-
resetting.
(Cut-out Dimensions: 9" W x 13" H)
10 1/2"
15"
3 3/8"
- 8" long throw black Kevlar woofer with butyl
surround and Phase Plug pole piece
- 1" pivoting textile soft dome tweeter
- 1 1/2 " textile soft dome midrange
- 91 dB sensitivity
- 12 dB/Octave crossover
- Poly-switch overdrive protection
- IR knock-out
- Frequency Response: 35 Hz - 20,000Hz
- Power Handling: 100 watts
- 8 Ohms
- 25 Year Transferable Warranty
- Cut-out Dimensions:
Inches: 9"W x 13" H x 3 1/4" D
Centimeters: 23cm x 33cm H x 8cm
- Overall Dimensions:
Inches: 10 1/2" W x 14 1/2" H
Centimeters: 27cm W x 37cm H
Specifications
