S
PECIFICATIONS
This speaker is a 6 1/2" electrodynamic
loudspeaker system designed to be flush
mounted in a wall or panel. A retro-fit clamp-
ing ring for mounting into an existing wall is
included. A new construction rough-in kit is
available as an optional accessory.
The loudspeaker mounts in an opening
accessible from the front without access to
the rear. The speaker has an overlapping
edge capable of covering discrepancies in
the mounting opening.
The loudspeaker has a perforated metal
grille to protect the driver and is removable
for servicing. All surfaces of the speaker in
the room are paintable.
The frame is of ABS material that is heat
resistant up to 120 degrees. The loud-
speaker is designed so as to perform cor-
rectly in an infinite baffle design requiring no
rear chamber.
The loudspeaker is comprised of a low
frequency driver and a separate high fre-
quency driver. The low frequency driver is
manufactured with a woven Kevlar cone,
phase plug pole piece extension, and butyl
surround. The high frequency driver is an
"eyeball" soft textile dome with a 1" diameter
voice coil for safe power handling capacity.
It also has a polyswitch protection circuit
which is non-mechanical and self-resetting.
The crossover is a 2nd order network (12 dB/
oct) and delivers two specific ranges of fre-
quencies to each the woofer and the tweeter.
(Cut-out Dimensions: 7 3/8" W x 10 7/8" H)
12 1/8"
3 1/4"
8 5/8"
- 6 1/2" long throw black Kevlar woofer
with butyl surround and Phase Plug
pole piece
- 1" pivoting textile soft dome tweeter
- 91 dB sensitivity
- 12 dB/Octave crossover
- Poly-switch overdrive protection
- IR receiver knock-out
- Steel clamp ring mounting system.
- Frequency Response: 45 Hz - 20,000Hz
- Power Handling: 80 watts
- 8 Ohms
- 25 Year Transferable Warranty
Cut-out Dimensions:
Inches: 7 3/8 "W x 10 7/8" H x 3 1/8" D
Centimeters: 19cm W x 28cm H x 8cm D
Overall Dimensions:
Inches: 8 5/8" W x 12 1/8" H
Millimeters: 22cm W x 31cm H
Website: www.ridleyacoustics.co.uk
