7 - English
FEATURES
PRODUCT SPECIFICATIONS
Engine...............................................................................................................................................................Subaru SP170
Lubricant Fill Volume .............................................................................................................................Approximately 18 oz.
Fuel Tank Capacity .....................................................................................................................................................0.98 gal
Maximum Pounds Per Square Inch Pressure* ......................................................................................................... 3,000 psi
Maximum Gallons Per Minute* ...................................................................................................................................2.6 gpm
Maximum Inlet Water Temperature ................................................................................................................................
104˚F
*Max. rating determined by PWMA Standard 101, when tested with red nozzle
KNOW YOUR PRESSURE WASHER
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
ENGINE SWITCH
The engine switch is used in combination with the starter
grip and rope to start the engine. It is also used to turn the
engine off.
FUEL TANK
This fuel tank has a maximum capacity of 0.98 gal.
(3.7 liters). Use unleaded automotive gasoline in the
engine.
HOSE STORAGE
Once the high pressure hose is rolled, hang it on the back of
the machine using the hook and loop strap to secure in place.
IDLE DOWN
The engine idle speed is automatically reduced when the
trigger is released. This feature increases fuel efficiency,
reduces the noise level, and decreases wear and tear over
the life of the pressure washer.
STARTER GRIP AND ROPE
The starter grip and rope is pulled to start the machine.
SUBARU
®
SP170 ENGINE
This Subaru engine enables the pressure washer to achieve
3,000 psi (pounds per square inch) at a rate of 2.6 gpm
(gallons per minute). Please read the engine manual included
with this product.
THERMAL RELIEF VALVE
This pump feature will prevent water temperatures from
reaching harmful levels by releasing a small amount of
water. Once the water has drained, the thermal relief valve
will reset itself.
TRIGGER HANDLE
The trigger handle has a gripping surface that provides
added control of the spray wand and helps reduce fatigue.
TRIGGER WITH LOCK OUT
Pulling the trigger releases a stream of water for high
pressure cleaning. The lock out provides protection against
unauthorized use.
Summary of Contents for RD80944
Page 27: ...NOTES NOTAS...
