RIDGID RD80763, Operator'S Manual, Page: 8 / 28

8
FEATURES
KNOw YOUR PRESSURE wASHER
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules
.
CRANE LIFTING HOOK
The crane lifting hook in the center of the unit makes lifting
the machine for transportation and/or relocation easy.
ENGINE SwITCH
The engine switch is used in combination with the recoil
starter grip to start the engine. It is also used to turn the
engine off.
FUEL TANK
This fuel tank has a maximum capacity of 0.95 gal. Use
unleaded automotive gasoline in the engine.
HOSE STORAGE
Once the high pressure hose is rolled, hang it on the front of
the machine using the hook and loop strap for convenient
storage.
RECOIL STARTER
The recoil starter is pulled to start the mac hine .
DUAL POwER SOAP NOZZLE
The Dual Power Soap Nozzle can be easily adjusted for long
range or short range detergent application.
SPARK ARRESTOR
This engine is not factory equipped with a spark arrestor.
In some areas it is illegal to operate an engine without a spark
arrestor. A spark arrestor is available by calling customer
service for assistance.
SUBARU
®
ENGINE
This EX1 Subaru engine enables the pressure washer to
achieve 3,300 psi.
THERMAL RELIEF VALVE
This pump feature will prevent water temperatures from
reaching harmful levels by releasing a small amount of wa-
ter. Once the water has cooled, the thermal relief valve will
reset itself.
TRIGGER HANDLE
The trigger handle has a gripping surface that provides added
cont
rol of the spray wand and helps reduce fatigue.
TRIGGER wITH LOCK OUT
Pulling the trigger releases a stream of water for high
pressure cleaning. The lock out provides protection against
unauthorized use.
UNPACKING
This product requires assembly.

Carefully cut the box down the sides then remove the
tool and any accessories from the box. Make sure that
all items listed in the packing list are included.
NOTE: This tool is heavy. To avoid back injury, lift with
your legs, not your back, and get help when needed.

Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.

Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.

If any parts are damaged or missing, please call
1-866-539-1710 for assistance.
PACKING LIST
Press ure Washer
Trigger Handle Rest (front and back)
Screw ()
Lock Nut
ASSEMBLY
30 ft. High Pressure Hose
Injection Hose
Auxiliary Handle
Trigger Handle
Spray Wand
Nozzle Holder (with Quick-Connect Nozzle (4) and
Dual
Power Soap Nozzle)
Nozzle Cleaning Tool
Rear Panel
Support Foot ()
Torx Screws (4)
Bolts (4)
Nuts (4)
Wh
eel ()
Washer ()
Axle ()
Hitch Pin ()
4-Cycle Engine Oil (SAE30 or SAE 10W30)
Torx Wrench
Flat Washer
Operator’s Manual