background image

8

WARNING:

If  any  parts  are  damaged  or  missing,  do  not 
operate  this  tool  until  the  parts  are  replaced. 
Failure to heed this warning could result in serious 
personal injury.

WARNING:

Do  not  attempt  to  modify  this  tool  or  create 
accessories  not  recommended  for  use  with  this 
tool. Any such alteration or modification is misuse 
and could result in a hazardous condition leading 
to possible serious personal injury.

WARNING:

To  prevent  accidental  starting  that  could  cause 
serious personal injury, always remove the battery 
pack from the tool when assembling parts.

UNPACKING

This product has been shipped completely assembled.

  Carefully remove the tool and any accessories from the 

box. Make sure that all items listed in the packing list are 
included.

  Inspect the tool carefully to make sure no breakage or 

damage occurred during shipping.

  Do  not  discard  the  packing  material  until  you  have 

carefully inspected and satisfactorily operated the tool.

  If  any  parts  are  damaged  or  missing,  please  call  

-866-539-70 for assistance.

PACKING LIST

Reciprocating Saw
Saw Blades ()
Tool Bag
Operator’s Manual

ASSEMBLY

WARNING:

Do not allow familiarity with your tool to make you 
careless. Remember that a careless fraction of a 
second is sufficient to inflict severe injury.

WARNING:

Always wear safety goggles or safety glasses with 
side shields when operating tools. Failure to do so 
could result in objects being thrown into your eyes 
resulting in possible serious injury.

WARNING:

Do  not  use  any  attachments  or  accessories 
not  recommended  by  the  manufacturer  of  this 
tool. The use of attachments or accessories not 
recommended can result in serious personal injury.

OPERATION

APPLICATIONS

You may use this tool for the purposes listed below:

 

Cutting  all  types  of  wood  products  (lumber,  plywood, 

paneling, composition board, and hard wood)

 

Cutting masonite and plastic

 

Cutting drywall

 

Cutting  metals  such  as  sheet  steel,  pipe,  steel  rods, 

aluminum, brass, and copper

This  product  will  accept  RIDGID  8  V  lithium-ion  battery 
packs and RIDGID 8 V nickel-cadmium battery packs. 
For complete charging instructions, refer to the Operator’s 
Manual  for  the  battery  packs  and  chargers  listed  in  the 
General Safety Rules.

CAUTION:

To reduce the risk of injury, charge only RIDGID 
lithium-ion batteries and RIDGID nickel-cadmium 
batteries  on  the  chargers  listed  in  the  General 
Safety Rules. Other types of batteries may burst, 
causing personal injury or damage.

Summary of Contents for R8442















Reviews: