background image

6

SYMBOLS

Important: 

Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper 

interpretation of these symbols will allow you to operate the tool better and safer.

    SYMBOL                 NAME                                                                  DESIGNATION/EXPLANATION

          V                   Volts                                                  Voltage

         A                   Amperes                                           Current

        Hz                  Hertz                                                 Frequency (cycles per second)

         W                   Watt                                                  Power

        min                  Minutes                                             Time

                               Alternating Current                           Type of current
                              
                               Direct Current                                   Type or a characteristic of current

         no                   No Load Speed                                Rotational speed, at no load

        

                  Class II Construction                        Double-insulated construction

      .../min                Per Minute                                        Revolutions, strokes, surface speed, orbits etc., per minute

                               Safety Alert                                       Precautions that involve your safety

                                                                                        To reduce the risk of injury, the user must read and understand  
                                                                                        the operator’s manual before using this product.

                              

Eye Protection

                                 Always wear safety goggles or safety glasses with side shields

                                                                                        and a full face shield when operating this product.

                               Wet Conditions Alert                        Do not expose to rain or use in damp locations.

The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations 
with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any 
danger. The instructions or warnings they give are not substitutes for proper accident prevention measures.

                          DANGER: 

Indicates an imminently hazardous situation, which, if not avoided, will result in death or  

                          serious injury.

                          WARNING: 

Indicates a potentially hazardous situation, which, if not avoided, could result in death or  

                          serious injury.

                          CAUTION:

 Indicates a potentially hazardous situation, which, if not avoided, may result in minor or  

                          moderate injury. It may also be used to alert against unsafe practices that may cause property damage.

       Note:

          Advises you of additional information concerning the operation or maintenance of the equipment.

     SYMBOL        MEANING

Read The Operator’s Manual

---

Summary of Contents for R82015





















Reviews: