7 - English
FEATURES
PRODUCT SPECIFICATIONS
Input .................................120 V, 60 Hz, AC only, 8.5 Amps
Hammer Speed .............................0-19,000/0-57,000 BPM
No Load Speed ......................... Low (0-1,000 r/min. (RPM)
High (0-3,000 r/min. (RPM)
KNOW YOUR HAMMER DRILL
See Figure 1, page 14.
The safe use of this product requires an understanding of
the information on the tool and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
ANTI-VIBRATION SYSTEM
The anti-vibration system absorbs hammer impacts during
operation.
AUXILIARY HANDLE ASSEMBLY
The drill is equipped with an auxiliary handle assembly for
ease of operation and to prevent loss of control.
BLOWS PER MINUTE
This tool features an impact speed of 0-19,000/0-57,000
BPM (Blows Per Minute). Blows Per Minute is the number
of impacts per minute.
CHUCK KEY
A chuck key has been provided for use when installing or
removing bits and removing the chuck. When not in use, the
chuck key can be placed in the chuck key holder.
CLUTCH
This drill features a clutch that limits the amount of torque
transferred to the user. With an excessive load, the clutch
will slip and make a ratcheting sound. The clutch disengages
the bit from the gear train to reduce the chance of damage
to the tool or of causing the user to lose control.
DEPTH STOP ROD
A depth stop rod has been supplied with this product to
assist in controlling the depth of drilled holes.
DIRECTION OF ROTATION SELECTOR
(FORWARD/REVERSE)
The drill has a direction of rotation (forward/reverse) selector
located above the switch trigger for changing the direction
of bit rotation.
LOCK-ON BUTTON
The lock-on button is convenient for continuous drilling for
extended periods of time.
TWO-SPEED GEAR TRAIN
The two-speed gear train is designed for drilling or driving
at
LO (1)
or
HI (2)
speeds. A slide switch is located on the
side of your drill for selecting either
LO (1)
or
HI (2)
speed.
Use low speed for high torque and high speed for faster
operation during low torque applications.
VARIABLE SPEED
The variable speed switch trigger delivers higher speed with
increased trigger pressure and lower speed with decreased
trigger pressure.
CALIFORNIA PROPOSITION 65
WARNING:
This product and some dust created by power sanding, sawing, grinding, drilling, and other construction activities
may contain chemicals, including lead, known to the State of California to cause cancer, birth defects, or other
reproductive harm.
Wash hands after handling.
Some example of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure
to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust
masks that are specially designed to filter out microscopic particles.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
