24
OPERATION
Figure 29
POWER SWITCH LOCK
To prevent any unauthorized person from
operating this saw, a padlock (not included) should be installed
into the lock hole located on the power switch. See Figure 29.
Be sure padlock is fully closed and locked before leaving this
saw unattended.
Safety switch
F2
indicated in Figure 29 needs to be engaged
prior to operation of the machine.
ALWAYS disconnect the power supply
before installing or removing a lock onto the power switch.
Failure to do so could allow the power switch to engage by
accident, resulting in serious injury.
F2
B
A
Figure 28
SUPPORTING LONG WORKPIECES
Additional support
A
may be used to make the workpiece lay
flat on the saw table. Use the included work clamp or a
C-clamp
B
to secure the workpiece to the miter saw table.
See Figure 28.
Summary of Contents for R4231
Page 35: ...35 NOTES...
