NaviTrack FloatSonde User Manual
Using the NaviTrack
FloatSonde
™
The NaviTrack FloatSonde
™
is a small, powerful,
battery powered device that transmits a 512Hz signal
to be picked up by the NaviTrack Sonde and Line
Locator. When introduced to a drain or sewer line
from a suitable access point, the unit floats and/or
rolls freely down the line.
Figure 1 – to turn the transmitter ON, press down firmly on
the top of the transmitter’s housing. The LED will illuminate.
Keep pressing until the LED begins flashing. To turn the
transmitter OFF, press and hold until the LED stops flashing.
During operation of the sonde, the LED will continue
to flash.
Figure 2 – a string may be attached to the ring on the bottom
of the transmitter for retrieval
.
Features
•
Flushable
•
Simple, one-button operation
•
LED operation indicator
•
Integrated retrieval hook
•
Operates up to 10 hours on two user-replaceable
CR2032 batteries
Specifications
Size:
∅
40mm (
∅
1.57”)
Weight: 27g
Operating Frequency: 512Hz
Frequency Tolerance: +/- 0.00005Hz
Typical maximum detection range in air with
NaviTrack receiver (varies with ambient noise and
interference): 10 ft
Red status LED
99 Washington Street
Melrose, MA 02176
Phone
781-665-
1400
Toll Free 1-800-517-8431
