RIDGID 2048-2-OS Operator'S Manual Download Page 1

1

OPERATORS MANUAL

MODEL 2048-2-OS 

RIDGID ON-SITE STORAGE EQUIPMENT

•  Do 

NOT put fuels, flammables, explosives or hazardous 

  materials inside these products.

•  Gasoline, solvents, gun powder or other munitions,  

 

  dynamite, propane, acetylene or other such products can  
  explode if stored inside these products.

•  Use these products 

ONLY for storing and transporting electric  

  or hand tools and equipment, and other similar materials.

•  Failure to follow these warnings or modifications or other  
  uses of these products could result in death, serious injury  
  or property damage.

 DANGER

 WARNING

To prevent electrical shock, explosion, fire and/or serious  

personal injury when using storage chest with:

Extension Cord -

•  Follow all Extension Cord manufacturer’s Warnings and  

 

  Instructions.

•  After removing knock-out, insert the rubber hole protector.    

  Do NOT insert extension cord through hole without 

  grommet in place (see figure 3). 

•  Only use a three-wire extension cord with all three prongs 

  intact. Never remove the round grounding prong.

•  Extension cord must be connected to a 120 Volt GFCI 

  protected outlet with proper ground. If GFCI outlet is not  

  available, use an extension cord with GFCI protection built in.

•  Check the insulation and plugs of extension cord before 

  using. Do NOT use cord if it is worn or damaged.

•  Do NOT overload extension cord.

•  Remove extension cord from the hole before moving or  

  transporting storage chest.

•  Only use an extension cord that is rated for outdoor use.

•  Do NOT connect extension cord to outlet that also supplies 

  critical safety equipment with power.

Cordless Power Tool Battery Chargers -

•  See Charger’s Owner’s Manual for proper use and care of  

  charger and batteries. Follow all Warnings and Instructions  

  provided with your battery charger.

•  Place chargers and electrical connections in tray.

•  Chargers are Dry location use only. Do NOT expose to liquid,  

  vapor, or rain. Should your charger become wet, Do NOT  

  attempt to use. Unplug extension cord from supply before  

  handling wet charger or cords.

•  Only use chargers and batteries that are intact and operating  

  properly.

•  Do NOT touch metal prongs when plugging charger into  

  extension cord.

•  Keep flammable materials like paper or rags away from  

  charger, cords or connections.

•  Do NOT place or attempt to charge lead acid, car type 

  batteries in storage chest.

Part No. 14-0029 Rev. A 7/10 (4823)

PRODUCT REGISTRATION

For your convenience, place 
product registration tear-off 
sticker here.

Purchase Date: _______________
Place of purchase: _____________
____________________________

Model # ___________Serial #  ________________

 

 

 

 

 

 

 

 

 

  WWW.RIDGID.COM

Summary of Contents for 2048-2-OS










Reviews: