background image

WARNING

SERVICING OF DOUBLE-INSULATED WET/DRY VAC

In a double-insulated Wet/Dry Vac, two systems of insulation are provided
instead of grounding. No grounding means is provided on a double-insulated
appliance, nor should a means for grounding be added. Servicing a double-
insulated Wet/Dry Vac requires extreme care and knowledge of the system,
and should be done only by qualified service personnel. Replacement parts
for a double-insulated Wet/Dry Vac must be identical to the parts they replace.
Your double-insulated Wet/Dry Vac is marked with the words "DOUBLE
INSULATED" and the symbol         (square within a square) may also be
marked on the appliance.

To reduce the risk of injury from electrical shock, unplug power cord before
servicing the electrical parts of the Wet/Dry Vac.

!

  

Key                

  No.          Part No.                                             Description

     1         830564-4            Actuator, Switch

     2         813213                Switch, Toggle

     3         832786-1            Power Head Assembly (Includes Keys 5 & 6)

     4         830847-1            Lid Latch

     5         509488                Float

     6         823201-3            Filter Cage

     7         VF5000               Qwik Lock™ Fine Dust Filter

     8         VT2509               Utility Nozzle

     9         VT2503               Car Nozzle

    10        VT2510               Wet Nozzle

    11        VT2502               Crevice Tool

    12        831337-9            Pro-Hose

    13        VT2508               Extension Wand

    14        SP6952               Owner’s Manual

Repair Parts

16 Gallon Wet/Dry Stainless Steel Vac

Model Number 1610RV0

Always order by Part Number - Not by Key Number

† These replacement parts may be available where you purchased your Vac.

16

SP6952 16 Gallon ESF1_SP6952  1/16/15  9:21 AM  Page 16

www.

.com

[email protected]

1.800.561.8187

Summary of Contents for 1610RV





















Reviews: