VRH150X
RM512
POWER AND CHARGING:
The onboard power display will illuminate momentarily
immediately before and after the device is turned on/off.
To recharge: open the rubber USB cover and use a
micro USB cable to connect to any CE / UL approved 5V
power source.
When charging is complete the VRH150X will
automatically stop accepting charge. The LEDs will
remain illuminated until the device is disconnected.
Full charge from empty will take approximately
3 - 3.5 hours.
Note:
Ensure that the VRH150X is completely dry before
attempting to charge the device. Do not attempt to
charge the VRH150X in temperatures above 35C or
below 5C. Doing so will void your warranty and may
cause permanent damage to the internal lithium cells
of the device.
25%
50%
75%
100%
