声明：本说明书著作权归杭州睿登科技有限公司所有，未经允许任何单位或个人不得用于商业用途。
6
A: Lower Board
B:Upper Board
C: Screws for fixing mats, extension board
and switch power supply
D: Screws for fixing case
and AC power socket
E: Non-slip mats
F: Rocker switch
G: AC power socket
H: Connection Cables
5. Assembly Procedure
5.1 Assembly Preparation
● RD60XX digital power supply*1, S800 case*1, 65V800W switch power supply*1
● Tools, accessory (DC power supply, 3 pin plug cable, multimeter, screw driver, test pencil...)
● Proper assembly environment
5.2 Assembly step
Note:
The case material is a bit soft and may be slightly deformed during transportation. If
there is a gap during the assembly, please straighten it before assemble it.
①Check the accessories: check if the accessories of S800 are same as accessories list or
accessory picture.
②Check RD60XX: Adjust input power supply to 12v/1A to power on RD6012, and set 5V/1A
output on RD60XX, turn on the output to see if the output is normal.
③Back board assembly: install the rocker switch and AC power socket on the lower board.
④Connect cables to switch power supply: (dangerous, non-professionals should not
operate)
Use long brown cable to connect the rocker switch and the live wire (L) of the switch power
