11
BICYCLE INSPECTION
Before riding your bicycle, always do an inspec
�
on to make sure all parts are adjusted and
working properly. The frame and components are designed to be used in a responsible manner
on streets, trails, or grassy areas. Our bicycles are not designed for racing, mountain biking,
jumping, stunt riding, riding with more than one rider, riding with heavy loads, or any extreme
type of riding or nonstandard use and the warranty will not cover any of the above riding types.
You are responsible for checking your bike before each ride and on a regular basis to make sure
that the frame and parts are not cracked, loose, or broken and are working in a proper fashion.
Failure to inspect your bike could lead to damage to your bike or severe injury or even death. If
you choose not to inspect your bike and breakage or failure occurs, you are responsible and not
our Bicycles or the dealer you purchased your bike from. Be responsible and safe - check your
bike before each ride.
If you see something you are uncertain about, take your bicycle to your local bicycle dealer.
General Inspec
�
on
- Check for loose parts by raising your bicycle about 3” o
ff
the ground and dropping it on the
�
res.
- Make sure ALL quick release mechanisms are locked and
�
ght.
- Make sure wheels, fork, headset, and seat post are
�
ght.
- Check frame/welds for cracks and bends. Immediately replace a damaged frame as this can
cause a crash and lead to a severe injury. Take immediately to your local bicycle dealer.
Quick Release Levers
Quick release levers are used on both wheels, the seat post, and the back rest. Quick release
levers can be replaced with bolts if you are concerned about the
�
or having your se
�
ng
changed. It is important that all quick release/bolts are
�
ght.
Summary of Contents for CRUZ01NB
Page 1: ...USER MANUAL ...
