3
Safety
This section describes the safety requirements and precautions to be taken. When
installing, using and removing the Newton 100-S & 200-S, you must comply with the
safety requirements and instructions, and take the correct safety measures.
Read and make sure that you have understood this manual and the
accompanying documents, so that you are aware of the safety instructions.
The dealer must also be familiar with the requirements relating to the on-site
installation of the Newton 100-S & 200-S. See the section "Installation requirements"
on page 12 for this.
3.1
General safety requirements
The Newton 100-S & 200-S unit is subject to the following general safety and
regulatory requirements:
Make sure that everyone who works with the Newton 100-S & 200-S has
received adequate training and is familiar with the safety requirements.
Always take prompt and appropriate action in response to warnings and
notifications.
Replace broken or malfunctioning components as soon as possible.
Only use original components to perform repairs or replacements. Please refer
to the current price list or contact the dealer.
It is not permitted to modify the system in any way. Unauthorized modifications
can cause serious harm to personnel, the Newton 100-S & 200-S or the crop.
Newton weighing system
11
