System pump manual
By turning the knob to ‘manual’ mode, the system pump
will begin to work. You can use this function to:
test the pump operation
bleed the air from the pipes.
System pump automatic
The automatic mode means that the FertiMiX Pro C is in
operation. In this mode, the controller can switch the
pump on and off automatically as needed.
6.3
Operation using Synopta (Quick Start)
This section provides a brief explanation of the most important (fertigation)
settings in Synopta. For more information, please refer to the "Ridder CX500
and MultiMa Irrigation Control User Manual", "Synopta Product Description" or
the Synopta help.
You use Synopta to operate the FertiMiX Pro C and to enter or adjust the fertigation
settings.
Figure 6-2:
Example of Synopta home page
Under ‘Controls’ (in the left-hand menu), you can find the controls and the associated
settings. The controls are grouped into a tree structure. Click through these until you
reach the desired control. To set a control, select it. The relevant screen opens. You
can then view and modify the settings.
FertiMiX
50
