![Ridder A0300301 User Manual Download Page 16](http://html1.mh-extra.com/html/ridder/a0300301/a0300301_user-manual_1457661016.webp)
15
- Check that the handles are set at the same height on both sides and that the locking buttons
are correctly engaged.
- Before each use, check the function of the brakes and make sure that the rollator is completely
unfolded.
- Check the walker regularly for damage and wear. Have defective components replaced
immediately and do not use the walker until it has been completely repaired. Do not make any
changes to the product.
- Do not use the product if it is damaged!
- Always observe the maximum load limits of the rollator and the accessories.
Never exceed this limit, otherwise the function and stability of the product cannot be fully
guaranteed.
- Do not stand or sit on the rollator and never use it as a stand-up or ascent aid!
- Since the walker is equipped with a folding function, there is always, and especially when
unfolding and folding, the risk of being squeezed or pinched.
Always be careful not to pinch your fingers or hand.
- Risk of burns! Do not expose the walker to direct sunlight or other extreme heat sources, as the
material can heat up quickly.
- Keep packaging material away from children.
Safety instructions / Commissioning
Commissioning
CAUTION!
!
Risk of injury from trapping during the entire assembly!
The walker is delivered folded.
unfold the walker:
1
1.1
!
1
Take the walker
out of the packaging.
1.1
Put the handle
tubes in the correct
position. Make sure
that the locking but-
tons on the sides of
the frame are open.