32DSSP03.B
2 - 4
D. CONTROLS AND INDICATORS
WARNING
THE LIFT IS ALLOWED TO OPERATE ONLY WHEN THE VEHICLE MANU-
FACTURER INTERLOCK CIRCUITRY IS ACTIVATED. IF NECESSARY, REFER
TO VEHICLE OPERATOR MANUAL FOR INTERLOCK INSTRUCTIONS. DO
NOT ATTEMPT TO OPERATE LIFT WITH INTERLOCK BYPASSED.
CONTROL PENDANT
Refer to
Figure 2-5.
The lift is operated with two rocker switches on a hard-wired, hand-held
remote control pendant. Control platform movement by pushing and holding one end of a
rocker switch. The ends of the switches are referred to in this manual as buttons.
Pushing the DEPLOY button causes the platform to unfold at floor level. Pushing the DOWN
button causes the platform to descend towards the ground. Pushing the UP button causes
the platform to rise towards floor level. Pushing the STOW button when the platform is at floor
level causes it to fold and retract into the vehicle.
Platform motion can be halted at any time by releasing the button. The pendant is usually
stored on a wall clip in an interior location that is near the lift.
FIGURE 2-5: CONTROL PENDANT
STOW
DEPLOY
UP
DOWN
STOW
BUTTON
DEPLOY
BUTTON
UP
BUTTON
DOWN
BUTTON