32DF9T01.A
1 - 5
TABLE 1-1: LIFT COMPONENTS FOR DEDICATED ENTRY MODEL
REF
NAME
DESCRIPTION
Left, Right, Front, Rear
Reference points from outside vehicle looking inward at lift.
1
Pump Enclosure
Contains lift electrical and hydraulic control components.
2
Electric Circuit
Breakers
Prevents high-current damage to lift electrical components.
3
Hydraulic Pump
Assy.
Electro-hydraulic unit provides hydraulic pressure used to raise
platform.
4
Pump Handle
Used to manually operate hydraulic pump.
5
Pull Box
Houses electrical termination points to lift, and a hydraulic line
disconnect point.
6
Control Pendant
Hand-held device used to control lift operation.
7
Carriage
Part of traveling frame that is mounted on rollers; moves on
rails located inside enclosure. Supports lifting frame.
8
Deployment Sys-
tem
Part of carriage. Employs an electric gear-motor to propel plat-
form out of enclosure, or pull it back in.
9
Manual Platform
Release Shafts -
2ea
Used when electric power is not available to lift. Releases plat-
form from enclosure to facilitate manual deployment. Actuated
by engaging and rotating either indicated shaft.
10
Slam-Lock
Handle
Locks handrail in upright position. L-handle unlocks handrail
from upright position before lowering.
11
Lifting Frame
Hinged arms that lift or lower platform; driven by single hydrau-
lic cylinder attached to carriage.
12
Manual Rollstop
Override Knob
Provides manual control of rollstop if electrical power is lost.
13
Platform Rollstop
Front barrier prevents wheelchair from inadvertently rolling off
the platform during lift use.
14
Platform
Curbed area occupied by passenger during lift operations.
15
Occupant Safety
Belt
Safety belt helps prevent unintentional acceleration of wheel-
chair from platform. Electrically interlocked so that “UP” and
“DOWN” functions are
disabled
if the belt is unbuckled.
16
Standee Handrails
Provides platform occupant with a stable handhold.
17
Bridgeplate
Plate unfolds when platform is at floor height to bridge gap be-
tween platform and vehicle interior.
18
Enclosure
Platform housing is rigidly attached to vehicle chassis.
19
Controller
Translates pendant commands to signals that control lift elec-
trical and hydraulic components.
END OF TABLE
